Gripping devices for picking fruits have such types of work as cutting, tearing and unscrewing. For apples, it is preferable to use slicing or unscrewing, while the fruit leg should not remain, damaging the apple during storage. In this article, we are developing a grab for picking apples. The gripper is used both for holding the fruit and for jamming, followed by unscrewing. One of the advantages is that the proposed method of collecting apples allows you not to waste time moving the manipulator from the tree to the basket, but only to grab and tear them off. The fruit enters the gripper device, after which it enters the fruit collection container through a rigid or flexible pipe. The gripper device is built on the basis of a ball-screw transmission, which is supplemented by a gear drive along the helical surface. This allows for rotation and rectilinear movement of the held fruit. The gripping device has a ratchet mechanism that allows you to fix the fruit. A mathematical model of the gripper device has been developed, which allows determining the torque of the engine depending on the position of the fingers. The parameters of the mechanism were optimized using a genetic algorithm and the results are presented in the form of a Pareto set. A 3D model of the gripper device has been built and a layout has been developed using 3D printing. Experimental laboratory and field tests of the gripping device were carried out. © 2023 ACM.