Indian Institute of Technology Palakkad&nbsp;(IIT Palakkad or IIT PKD) is a public autonomous&nbsp;engineering&nbsp;and&nbsp;research&nbsp;institute located in&nbsp;Palakkad,&nbsp;Kerala. It was&nbsp;one of the five new&nbsp;IITs&nbsp;proposed in the&nbsp;2014 Union budget of India. The campus was inaugurated on 3 August 2015. The institute has 94 faculty, 978 students, and 63 non-teaching staffs.

IT Palakkad currently offers four-year Bachelor of Technology (B.Tech) and two years MS programmes in 8 different engineering disciplines including&nbsp;Computer Science, Electrical, Mechanical, Civil among others.

&nbsp;

IIT Palakkad

Titanium and its alloys are well known for their difficult machinability nature. Because of Ti-6Al-4V alloy’s strong chemical affinity, high temperature and pressure during the grinding process, the formed chips easily weld onto the grinding wheel surface. This phenomenon reduces the wheel life and diminish the surface quality. To control the effect of temperature, most grinding operations today employ cutting fluids. These fluids help in improving the surface quality and increasing the wheel life. However, because of environmental and economic concerns, industries are now looking for sustainable alternative cooling techniques such as cryogenic cooling. The aim of this study is to present the application of liquid nitrogen cryogenic cooling as an alternative cooling technique for grinding Ti-6Al-4V alloys. To compare the effect of cryogenic condition, experiments were conducted under both dry and wet (soluble oil) conditions. Experimental results proved the effectiveness of cryogenic cooling in reducing the grinding force, obtaining better surface finish, and being less damaging to the surface condition. Finally, multiple regression models were developed to predict the normal force and tangential force in cryogenic condition. The developed models have been validated with experimental data, and the maximum prediction error of the model for normal and tangential forces was less than 12% and 9%, respectively. © 2014, IMechE. All rights reserved.

Department of Mechanical Engineering

World University root node

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Grindability improvement of Ti-6Al-4V using cryogenic cooling

International Journal of Precision Technology 4 (3/4)

An investigation into the application of Al2O3nanofluid-based minimum quantity lubrication technique for grinding of Ti-6Al-4V

Minimum Quantity Lubrication (MQL) technique obtained a significant attention in machining processes to reduce environmental loads caused by usage of conventional cutting fluids. Recently nanofluids are finding an extensive application in the field of mechanical engineering because of their superior lubrication and heat dissipation characteristics. This paper investigates the use of a nanofluid under MQL mode to improve grinding characteristics of Ti-6Al-4V alloy. Taguchi-s experimental design technique has been used in the present investigation and a second order model has been established to predict grinding forces and surface roughness. Different concentrations of water based Al2O3 nanofluids were applied in the grinding operation through MQL setup developed in house and the results have been compared with those of conventional coolant and pure water. Experimental results showed that grinding forces reduced significantly when nano cutting fluid was used even at low concentration of the nano particles and surface finish has been found to improve with higher concentration of the nano particles

World Academy of Science, Engineering and Technology, International Science Index 70, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering